specifications:
- Item No. : LD-5730-24-60S10-19P0-W
- Dimension
- Technical Details
Power 19.2 w/m Light efficacy 100 lm/w (+/-10%) Luminous flux 2052-2109 lm/m PCB width 10 mm Voltage DC 12V / 24V Cutting interval 50mm / 100mm IP lever 
- Item No. : LD-5730-24-75S10-24P0-W
- Dimension
- Technical Details
Power 24 w/m Light efficacy 100 lm/w (+/-10%) Luminous flux 2565-2636 lm/m PCB width 10 mm Voltage DC 12V / 24V Cutting interval 40mm / 80 mm IP lever
- Item No. : LD-5730-24-120S15-38P0-W
- Dimension
- Technical Details
Power 38.4 w/m Light efficacy 100 lm/w (+/-10%) Luminous flux 4104-4218 lm/m PCB width 15 mm Voltage DC 24V Cutting interval 25 mm IP lever
Introduction of 5730 SMD LED:
5730 SMD, size: 5.7×3.0.0.9mm, is characterized by high power, high brightness, low attenuation, low energy consumption, long life, strong antistatic ability. high brightness and good light-color consistency.
Key Features for Your Selection:
- >80 CRI(Color Rendering Index)
- 2400K~7000K Widely CCT range
- Up to 3 Step Color Consistency
- Fully Dimmable
- Perfect Heat-dissipation to ensure 50000hours Lifespan.
Application & Wide Use
Based on the high brightness, low attenuation, and high color consistency, 5730 LED strip light has a wide range of applications especially in commercial lighting projects:
- Architectural lighting
- The hotel lobby lighting
- Display / jewelry case lighting
- Outdoor modeling lighting design
- Bridge landscape lighting
Myledy IP Grade Introduction:
IP is an acronym “Ingress Protection”, a measurement standard ratings used to indicate the level of protection for electrical equipment against solids and liquids.
Myledy is equipped with state of the art manufacturing equipment utilizing cutting edge technology and top quality silicone glue to offer anti-yellowing, resistance to high and low temperature and diverse IP rating lever IP62~IP68 waterproofing for special applications.
IP20
Non-Waterproof
IP62
Silicon Glue
IP65
Silicon Sleeve
IP66
Silicon Extrusion
IP67
Silicon Glue with
Half Sleeve
IP68
Silicon Glue With
Full Sleeve
CCT Spectrum Reference:
What Is CCT?
CCT(Correlated Color Temperature at which the light works) is represented by the number and the capital letter K (Kelvin), tells you the hue of white light. The smaller the Kelvin rating, the warmer the light, and vice versa. “Warm” and “Cool” do not describe the working temperature of the light, but rather the effect of light on us.
What CCT Should I Choose?
The color temperature of the LED lighting effects your mood. The amount of white in your room will magnify this effect. If your space has white walls and ceilings, and you choose a warmer white tone, it will look warmer than using a dark color scheme. Conversely, if your room is dim, you may need a cooler white tone so you can see the room clearly.
Wiring Diagram:
First, Calculate The Wattage of Each LED Strip — You should already have an idea of how much power will be required to run your LED light tapes. However, there might be some additions or subtractions in the number after you’ve cut and connected the tapes together. So, calculate the overall wattage required to power your flexible LED light strips again.
Second, Find Compatible Power Supply — You need to choose a driver that will use only 80% of its overall power to run the LED tapes. This is very important for the longevity of both your power supply and LED strips.
Third, Connect LED Strip to Power Supply — You can make series circuit or parallel circuit for the LED strip lights. And all Myledy LED strip lights are dimmable, you can also connect a dimmer for better brightness control.
Related Accessories:
