IP65 Silicone Sleeve LED Strip Connector

  • For silicone sleeve led strip
  • Solderless design, easy to use
  • Workable LED qty 30-120led/m
  • Gripping LED strip very reliably
  • Optional for single color, RGB strip
  • Workable wire gauge AWG22-18
  • Support current up to 5A
Category :

Specifications:

Applications & Use:

Hippo NS Series – IP65 silicone sleeve LED strip connectors are an excellent and reliable way of joining LED strip to strip or strip to cable.

They are specially designed for silicone sleeve led strip. Simply select the correct size NS connector, insert the tape and close the connector until it latches. This will make a strong physical and electrical connection ensuring a reliable joint.

Play Video

Types Of NS Series - IP65 Silicone Sleeve LED Strip Connectors:

IP68 Led Strip Connector
  • For 10mm PCB, single color, silicone sleeve LED strip
Item No.LD-NS1002LD-NS1012
Joint typestrip to strip jointstrip to wire joint
Wire LengthNo wire
Pin pitch5mm
Working voltageDC3V~24V 
Rated current5A
Workable wire Gauge22 -18 AWG
Wire Color Red & Black
10mm Rgb Led Strip Connector
  • For 10mm PCB, RGB color, silicone sleeve LED strip
Item No.LD-NS1004LD-NS1014
Joint typestrip to strip jointstrip to wire joint
Wire LengthNo wire
Pin pitch2.5mm
Working voltageDC3V~24V 
Rated current5A
Workable wire Gauge22 -18 AWG
Wire Color Red & Black

Myledy IP Grade Introduction:

IP is an acronym “Ingress Protection”, a measurement standard ratings used to indicate the level of protection for electrical equipment against solids and liquids.

Myledy is equipped with state of the art manufacturing equipment utilizing cutting edge technology and top quality silicone glue to offer anti-yellowing, resistance to high and low temperature and diverse IP rating lever IP62~IP68 waterproofing for special applications.

IP20
Non-Waterproof

IP20 without waterproof

IP62
Silicon Glue

IP62 silicon glue

IP65
Silicon Sleeve

IP65 silicon sleeve

IP66
Silicon Extrusion

IP67
Silicon Glue with
Half Sleeve

IP68
Silicon Glue With
Full Sleeve

IP68 Silicon glue+silicon case

Regular Wiring Method:

First, Calculate The Wattage of Each LED Strip — You should already have an idea of how much power will be required to run your LED light tapes. However, there might be some additions or subtractions in the number after you’ve cut and connected the tapes together. So, calculate the overall wattage required to power your flexible LED light strips again.

Second, Find Compatible Power Supply — You need to choose a driver that will use only 80% of its overall power to run the LED tapes. This is very important for the longevity of both your power supply and LED strips.

Third, Connect LED Strip to Power Supply — You can make series circuit or parallel circuit for the LED strip lights. And all Myledy LED strip lights are dimmable, you can also connect a dimmer for better brightness control.

With A Dimmer
LED Strips Parallel Circuit

Related Accessories:

Waterproof Power Supply
Power Supply
Controller
Dimmer
N20 Led Strip Lights Connector
Connector
Scroll to Top

request a quote here

get in tough right now!