LD-NS1004

led strip connector silicone sleeve rgb A1

Workable for:
* Silicone sleeve led strip
* RGB color
* With 10mm wide FPCB
* Strip to Strip joint

LD-NS1014

led strip connector silicone sleeve rgb A2

Workable for:
* Silicone sleeve led strip
* RGB color
* With 10mm wide FPCB
* Strip to Wire joint
Non peeling wire

Workable LED stripSilicone sleeve, 10mm PCB, RGB
Rated Current5A
Rated Voltage(III/2)0~36V
Pin Pitch2.4mm
Polarity Qty4
Way of Contact to Strip LightInsulation-piercing contact
Workable Wire OD Φ1.5mm ~ Φ2.1mm
Housing Color (cap/base)Transparent / Black
Workable Wire Gauge0.35mm² ~ 0.75mm (AWG22 ~ AWG18)
Housing MaterialPC
Pin MaterialPhosphor Copper (Cu)
Flame Retardant LevelUL-94-V0

How to Connect

A1: Cut LED Strip along the cutable mark

A2: Remove 3M adhesive tape

A3: Insert LED strip and close cap down.

A4: Finish connection to LED Strip

B1: Insert wire into holder. (Non peeling Wire)

B2: Down close cap of connector

B3: Ensure cap is locked by connector base

B4: Inject silicone glue through injection hole

B5: Cover the cap, awaiting for drying of silicone glue

B6: Connection completed

Back