Item No.: LD-NS1002

 

Workable for:
* Silicone sleeve led strip
* Single color
* With 8mm/10mm wide FPCB
* Strip to Strip joint

led strip connector silicone sleeve A1

Item No.: LD-NS1012

 

Workable for:
* Silicone sleeve led strip
* Single color
* With 8mm/10mm wide FPCB
* Strip to Wire joint
Non peeling wire

led strip connector silicone sleeve A2

Technical data

Workable LED strip:Silicone sleeve, 8/10mm PCB, Single color
Rated Current:5A
Rated Voltage(III/2):0~36V
Pin Pitch:5mm
Polarity Qty:2
Way of Contact to Strip Light:Insulation-piercing contact
Workable Wire OD: Φ1.5mm ~ Φ2.1mm
Housing Color (cap/base):Transparent / Black
Workable Wire Gauge:0.35mm² ~ 0.75mm (AWG22 ~ AWG18)
Housing Material:PC
Pin Material:Phosphor Copper (Cu)
Flame Retardant Level:UL-94-V0

How to connect

A1: Cut LED Strip along the cutable mark

A2: Remove 3M adhesive tape

A3: Insert LED strip and close cap down.

A4: Finish connection to LED Strip

B1: Insert wire into holder. (Non peeling Wire)

B2: Down close cap of connector

B3: Ensure cap is locked by connector base

B4: Inject silicone glue through injection hole

B5: Cover the cap, awaiting for drying of silicone glue

B6: Connection completed