Item No.: LD-ND1005

 

Workable for:
* Silicone glue led strip
* RGBW
* With 12mm wide FPCB
* Strip to Strip joint
Non peeling silicon glue

Item No.: LD-ND1215

 

Workable for:
* Silicone glue led strip
* RGBW
* With 12mm wide FPCB
* Strip to Wire joint
Non peeling wire
Non peeling silicone glue

Technical data

Workable LED strip:Silicone glue, 12mm PCB, RGBW
Rated Current:5A
Rated Voltage(III/2):0~36V
Pin Pitch:2.4mm
Polarity Qty:5
Way of Contact to Strip Light:Insulation-piercing contact
Workable Wire OD: Φ1.5mm ~ Φ2.1mm
Housing Color (cap/base):Transparent / Black
Workable Wire Gauge:0.35mm² ~ 0.75mm (AWG22 ~ AWG18)
Housing Material:PC
Pin Material:Phosphor Copper (Cu)
Flame Retardant Level:UL-94-V0

How to connect

A1: Cut LED Strip along the cutable mark

A2: Remove 3M adhesive tape

A3: Insert LED strip and press cap down. (Non peeling silicone glue)

A4: Finish connection to LED Strip

B1: Insert wire into holder. (Non peeling Wire)

B2: Down close cap of connector

B3: Ensure cap is locked by connector base

B4: Connection completed