Workable LED strip | Silicone glue, 8mm PCB, Single color |
Rated Current | 5A |
Rated Voltage(III/2) | 0~36V |
Pin Pitch | 3.6mm |
Polarity Qty | 2 |
Way of Contact to Strip Light | Insulation-piercing contact |
Workable Wire OD | Φ1.5mm ~ Φ2.1mm |
Housing Color (cap/base) | Transparent / Black |
Workable Wire Gauge | 0.35mm² ~ 0.75mm (AWG22 ~ AWG18) |
Housing Material | PC |
Pin Material | Phosphor Copper (Cu) |
Flame Retardant Level | UL-94-V0 |
How to Connect
A1: Cut LED Strip along the cutable mark
A2: Remove 3M adhesive tape.
A3: Insert LED strip and press cap down. (Non-peeling silicone glue)
A4: Finish connection to silicone led strip
B1: Insert wire into holder. (Non peeling Wire)
B2: Down close cap of connector
B3: Ensure cap is locked by connector base
B4: Connection completed