LD-NL0802
Workable for:
* Non-waterproof led strip
* Single color
* With 8mm wide FPCB
* Strip to Strip joint
LD-NL0812
Workable for:
* Non-waterproof led strip
* Single color
* With 8mm wide FPCB
* Strip to Wire joint
(Non peeling Wire)
| Workable LED strip | Non-waterproof, 8mm PCB, single color |
| Rated Current | 5A |
| Rated Voltage(III/2) | 0~36V |
| Pin Pitch | 3.6mm |
| Polarity Qty | 2 |
| Way of Contact to Strip Light | Insulation-piercing contact |
| Workable Wire OD | Φ1.5mm ~ Φ2.1mm |
| Housing Color (cap/base) | Transparent / Black |
| Workable Wire Gauge | 0.35mm² ~ 0.75mm (AWG22 ~ AWG18) |
| Housing Material | PC |
| Pin Material | Phosphor Copper (Cu) |
| Flame Retardant Level | UL-94-V0 |
How to Connect
A1: Cut LED Strip along the cutable mark
A2: Remove 3M adhesive tape
A3: Insert LED strip and press cap down
A4: Finish connection to LED Strip
B1: Insert wire into holder. (Non peeling Wire)
B2: Down close cap of connector
B3: Ensure cap is locked by connector base
B4: Connection completed